When it comes to Electrical Panel Replacements, homeowners and businesses throughout Los Angeles County trust Armo Electric USA for professional results.
Most homes built before 2000 were designed for electrical loads that are a fraction of what modern families demand. Electrical Panel Replacements addresses this fundamental mismatch. An undersized or outdated panel doesn’t just trip breakers — it creates fire hazards through overheated connections, corroded bus bars, and breakers that fail to trip when they should.
Panel upgrades involve coordination with your utility company for the service drop, installation of a new meter base if required, and careful circuit mapping to maintain power to critical systems during the changeover. Our electricians create detailed circuit directories and label every breaker clearly — something that’s invaluable during emergencies or future service calls.
We also evaluate the need for whole-house surge protection (required by NEC 2020 Section 230.67), AFCI breakers for bedrooms and living areas, and dedicated circuits for high-draw appliances. A properly planned panel upgrade anticipates future needs — adding capacity for solar, battery storage, or additional EV chargers down the road.
Panel work is the most critical electrical service there is. Our team has upgraded over 2,000 panels across LA County — from 60-amp fuse boxes in 1940s homes to 400-amp services for modern estates. This isn’t a side job for us — it’s our specialty.
Every panel upgrade we perform is fully permitted and inspected. We handle the paperwork, schedule the inspection, and ensure first-time pass rates above 98%. No shortcuts, no under-the-table work.
Our father-son team has seen every panel brand, every wiring condition, and every surprise that old homes can throw at you. That experience means fewer surprises, faster completion, and work that stands up to any inspection.
We don’t just solve today’s problem — we design for tomorrow. Every panel upgrade includes capacity planning for EV chargers, solar, battery storage, and home additions. You won’t need another upgrade for decades.
📋 Recent Service Call — Santa Monica, CA: A homeowner near Montana Avenue wanted to add an EV charger but their 100-amp panel was maxed out. Rather than just upgrading the panel, we performed a comprehensive load analysis and discovered that their electric dryer, water heater, and AC were all on the same leg of the panel — creating a dangerous imbalance. The panel upgrade to 200 amps solved both the capacity issue and the load balancing problem. Sometimes what seems like a simple upgrade reveals deeper issues that need attention.
| Feature | Fuse Box (Pre-1960s) | Modern Breaker Panel |
|---|---|---|
| Overcurrent Protection | Fuses blow once — must replace | Breakers trip and reset — reusable |
| AFCI/GFCI Protection | ❌ Not available | ✅ Built into breakers |
| Capacity | 30-60 amps typical | 200-400 amps |
| Safety | Penny-behind-fuse risk, no arc protection | Tamper-resistant, arc-fault detection |
| Insurance | Many insurers deny coverage | ✅ Fully insurable |
| EV Charging Support | ❌ Insufficient capacity | ✅ Handles 50A+ EV circuits |
| Home Value Impact | Reduces value, red flag for buyers | Modern panel adds value |
Contact Armo Electric USA at (866) 971-2246. Licensed electricians standing by to assist you.
Same-day service. Free estimates. Licensed & insured electricians standing by.
📞 Call (866) 971-2246 Get Free Estimate